General Vacuum EHPT 2250 Vacuum Metallizer, a twin-source evaporative vacuum metallizer for minimal down time, equipped with a 50" maximum diameter single position unwind with peel-off roll, deposition monitoring system providing closed-loop deposition control of individual wire feeds and heat control, optical monitor beam for deposition control, 24 boats, 3-zone vacuum chamber for more efficient deposition, one (1) chill roll, Thermal Care chilled water system, one (1) Hulvac HVC 340 roughing pump, three (3) Kinnet KT505 LP roughing pumps, three (3) Roots Holmes HV7000 blowers, three (3) Roots Holmes 13000 blowers, 50" maximum diameter single position rewind with layon roll capable of running in minimum gap or layon roll mode, Siemens S5 PLC, Siemens Simoreg digital drive system. Maximum mechanical speed: 2750 FPM. Machine must be removed by December 31, 2012.

General Vacuum HPAS 210-224 Vacuum Metallizer, a free span evaporative vacuum metallizer equipped with a 45" maximum diameter single position unwind with peel-off roll, deposition monitoring system providing closed loop deposition control of individual wire feeds and heat control, optical monitor beam for deposition control, four (4) Stokes 412 roughing pumps with two (2) Aerzen GLB 14.9 HV blowers, two (2) Varian NHS 35 diffusion pumps, two (2) Aerzen GMB 16.13HV blowers, 45" maximum diameter single position rewind with layon roll and minimum gap capability, Square D Symax 400 PLC, Eurotherm 590 digital drives. Maximum mechanical speed: 2000 FPM. Machine must be removed by December 31, 2012.

Used Camvac Thetford Vacuum Metallizer, a twin source evaporative vacuum metallizer for minimal down time, equipped with a 45" maximum diameter single position unwind, dancer tension control, optical monitor beam for deposition control, eight (8) Stokes 412 roughing pumps with Edwards EH 4200 blowers, three (3) Varian NHS 35 diffusion pumps, two (2) Varian 305B vapor boosters, two (2) Stokes 149 backing pumps, Polycold PFC 1100 HC, Polycold 1100 ST, Polycold PFC 1100, inline slitting capability in the chamber, single chill roll, 45" maximum diameter single position rewind, Allen-Bradley 502 PLC (drive control), Square D Symax 400 PLC (machine control), Eurotherm digital drive system. Maximum mechanical speed: 2000 FPM. Machine must be removed by December 31, 2012.

FOR ADDITIONAL INFORMATION AND INSPECTION: 
By Appointment Only: Contact Auctioneers Office at 617 964 188 or ross@josephfinn.com